More than you ever needed to know about the ladder flipper! Bob Rhoads made the ladder and supplies these actual dimensions:
- Rungs are 8.5mm each
- Rungs are 61 MM apart at center
- Ladder uprights are 36MM s apart on insides
- Toy hole is 9mm
- Hole is centered 15.5 mm down from each end
- Toy is 28 mm wide and 66mm long
When the toy rests on a rung, you should have a 6mm gap in between it and the edge of the rung above it.*********The "Toy-Making Dad" has detailed instructions on his web site. I really should have put a few minutes of research into this project before I started!*********Lane Steinsultz clued me in on this site that has an actual diagram.
*********And Finally, Rance Rupp, over on LumberJocks, shot this video:
Related Posts by Categories
0 comments:
Post a Comment