skip to main |
skip to sidebar
Posted by
chun
|
|
4:53 PM
Labels:
axe,
fun,
new,
Woodworking
I have been playing with my new Axe and carved a basic cooking spatula and kitchen spoon. Neither of which are finished yet, so this is more of a progress report really.
The wood is from a small Ornamental Cherry tree that I cut down from the garden a few weeks back and is soaking wet green. I dont really know much about Green Wood Working (yet), so I imagine I have to leave things to dry out before they can be finished? Any advice from readers would be appreciated!
The cooking spatula is functional from a Bushcraft perspective but thats about it!
I should have paid more attention to the small knots, the main one causing problems is on the side and there is another tiny one in the center of the blade - A lesson learnt. Once the wood has dried out I will try and sand a finish on it and oil it properly.
As for the spoon, well these pics are straight off the axe I havent touched it with a knife yet.

I have tried to keep the handle of the spoon the same design as the spatula as if by some miracle this little project was a success then they would make a nice matching pair. I dont have a Crook knife yet so I cant even begin on the bowl of the spoon.
One thing I am very wary of and that is not getting too attached to these little creations. The baton mallet I made last week has self destructed in the warmth of the central heating. Not so surprising I guess, Green Wood + Warm House = Cracked Wood. This is quite extreme cracking though!


Oh well - it still works (for now)...
Its certainly fun to just be able to sit down and hack into a piece of wood with an axe and make something vaguely recognisable. Its surprising how quickly you learn different techniques according to the accuracy of the cuts required. I am looking forward to getting some better wood as these pieces are just what I had in the garden. Id love to try a bowl out of birch or something similar.
If the spoon and spatula dont self destruct while drying out or before I acquire a crook knife, Ill get these finished and post the results despite how bad they look - Its all part of the adventure!
Read More..
Posted by
chun
|
|
12:06 PM
Labels:
my,
new,
tools,
Woodworking
Just a quick post while Im waiting for some glue to dry...
While making my small bedside table I quickly came to realise that I was spending most of my time making my inaccurate cuts to length correct by planing the end grain with a block plane. My old steel backed backsaw is slightly bent, almost blunt and in need of a sharpen, not to mention a slightly loose handle. This combined with my natural inability to saw straight meant a lot of wasted time, especially as I was leaving the marking lines and then some just incase the cut went wrong.
Now dont get me wrong, I know I could spend some time sharpening the saw etc but what better excuse than to splurge on some shiny new toys?
I have to say a big thankyou to my girlfriend for my late Birthday presents...
My new bling bling Lie Nielson 14ppi Crosscut Carcass Saw & 15ppi Thin Plate Rip Dovetail Saw has made cutting to size a breeze. I can choose to split the line or leave it intact with a very minimal of effort and maintain a square cut. Yes they are pricey and probably way overkill for my beginning needs, but the smile I get just from picking them up makes them worth it!
I was a little worried when I first used the new saws as they seemed to jump out of the cut and generally not seem to behave, but soon learnt not to force the cut and relax both my grip and pressure letting the weight of the saw and the sharpness of the teeth do the work. The result an almost perfect square cut 99% of the time.
The nice shiny plates also allow me to mark a straight perpendicular line on the non-waste side of the cut and the reflection in the saw plate aids as a guide to keep the blade straight and plumb. In short these saws are teaching me how to saw accurately and correctly.
They look stunning as well!...
Read More..
Posted by
chun
|
|
4:01 PM
Labels:
and,
chair,
fair,
new,
wood,
Woodworking
Sorry I havent posted anything this week. Its getting down to the end of the school year for Wyatt and we are scrambling to finish up a couple of units I wanted to complete this year. Then its off to high school next fall.
We had a meeting earlier in the week for all the parents of the drama students. Its really going to be a busy curriculum. For performing arts schools, this one looks really awesome.
Naturally, we were hit up for lots of parent volunteering. I signed up to work in the build crew to help make sets, props, and what-not. That should be really fun. I suspect they will have a lot of work for me, since I have a shop. Crazy how schools no longer have wood shops. Or any other trade classes for that matter.
New wood!It was a great week for mail, and I have to give a few shout-outs to people who sent me stuff.
Larry Clinton send me a large box of all kinds of extra wood: mahogany, ipe, etc.
Scott Egbert sent me an enormous box of Walnut, Mahogany and something red.
And lastly, thanks goes to our friend Tim Sluder, who sent me four small mirrors and a bunch of shaker pegs! My imagination is already running wild. Gotta come up with something cool.

So thanks guys! I really appreciate your support. Looks for this stuff in upcoming projects.
The Fair Chair 2011.
The Marin County Fair is at the beginning of July, so I already got a head start this year. You may recall back in January when I showed you this picture of a chair that I thought I may try to duplicate.
It takes me a while to get around to things, but heres my version:
Read More..
Posted by
chun
|
|
2:10 AM
Labels:
my,
new,
old,
tools,
Woodworking
Recently my girlfriends mum invited me to look through her shed for any tools that might be of use in my new woodworking hobby. A lot of the tools I found were suffering from rust and have not been used (or even touched) for around 18 years.
Here are a few of the tools I am either in the process of cleaning up or have cleaned up and pressed back into service once again.
- Roll of 12 Auger bits
- Ridgway Large Expanding Bit Set 3/8" - 3"
- Large Yankee Push Screwdriver
- Small Ratchet Screwdriver
- Marking Gauge
- Small Hammer
- Stanley 102 Block Plane
- Rapier Spokeshave
- 2 x Egg Beater Drills (One Stanley the other a Millers Falls?)
- Spinney Bailey No#4 Bench Plane - I may set this up as a Scrub Plane
- 2 x Sureform (Straight & Curved) Planes
- Wooden (Shoulder?) Plane.
There were also three Warranted Superior Panel saws which I counted as: 5tpi, 8tpi & 10tpi all filed rip. I de-rusted the blades, sanded and oiled the wooden handles and have sent them off along with my own 10tpi panel saw for re-sharpening and should get them back next week.
I have requested the 5tpi to be filed rip, the 8tpi to be filed crosscut and the other two 10tpi saws rip and crosscut. At some point in the near future, I would like get the required saw files and tools and be responsible for sharpening my own saws.
Cleaning, de-rusting, oiling, servicing and sharpening all these tools is helping me better understand how they work and whats required to keep them functioning properly - all the more important in the hand tool world.
Its certainly a steep learning curve!
Read More..
Posted by
chun
|
|
9:15 AM
Labels:
my,
neighbor,
new,
Woodworking
Happy April! *****
*****
Read More..
Posted by
chun
|
|
3:39 PM
Labels:
my,
new,
Woodworking,
workshop
At last I have a workshop to play in! ...
After finally getting the spare room decorated, I have now moved my tools in and made some wood shavings. Tool storage is pretty basic at the moment but I hope to either build a tool chest or wall cabinet at some point.
As you can see from the photo below, the new bench is a nice size for such a small room and fits my needs fine as a beginning wood worker.
As expected, the bench does try to run away from me when planing heavily but its not to bad if I butt it against one of the walls and my tools are sharp. Its also too high for planing, although the perfect height for cutting, etc, so I might shorten the legs a little in time to get more weight down over the plane. Well see its early days...
Aside from a bench hook and generally playing around with scraps of wood, this small bedside table is the first thing I have ever made out of wood in my life! All done using hand tools only and no electricity aside from the room lights!
Its made using Half Lap joints from scrap wood (really soft Pine) thrown away by the next door neighbour and an old bed headboard, (which I think is African Mahogany) for the top. It took me 3 days to build it (including stripping heavy varnish from the Mahogany) and I have already learnt so much in those three days.
As a logical learning progression, I thought I would start with simple Half Lap joints and then progress on to Mortise & Tennons, Finger Joints and finally Dovetails.
I have some Mahogony offcuts from my boat, bought some pieces of cheap Pine from the timber yard and stock piled some old wood that was destined to be thrown away, so expect some more small projects soon.
Read More..
Posted by
chun
|
|
1:56 AM
Labels:
new,
saw,
tenon,
Woodworking
After much research and deliberation I have finally got myself a shiny new and very large Tenon Saw.
For ages I have felt like I have needed something bigger than my Lie Nielson Carcass & Dovetail Saws, but I couldnt decide on the size or whether it should be sharpened Crosscut or Rip.

As far as size goes, it seems the wood working superstars recommend something at least 14" and preferably larger.
Most of my cutting is to length and therefore requires a Crosscut sharpened saw but larger tenons require a Rip sharpened saw and my Dovetail saw blade is only 1-5/8" (4.12cm) deep. I certainly didnt want to buy another two saws, so which saw would provide the best coverage and compliment my existing joinery saws?
I came to the conclusion that I should get a Rip sharpened saw which could also be used across the grain if required and decided on the Lie Nielson 16" (400mm) 11ppi Tenon saw (reviewed here).
As I found previously, I had to spend a while learning to use the new saw as it initially jumped about in the kerf. This is a large saw and a lot heavier than what Im currently used to. The weight, combined with the extra height of your hand above the cut (blade depth) and the angle of the (dangle) handle meant I had to saw very slowly and steadily not applying any downward pressure at all other than the natural weight of the saw while my body became familiar with the movement. After quite a few rip cuts in some scrap Pine I finally got the hang of it, and found the saw to cut fast and track straight as an arrow. No doubt I will further improve the more I use the saw.
I was also pleasantly surprised at how smooth cutting the saw was when cutting across the grain, I will certainly be able to cut wider and thicker boards to length on the bench hook when my Carcass saw is struggling. Anything that is to big for this new 16" beast can then be handled with my panel saws.

So ... all in all I feel it has been a good purchase and my Trinity of Joinery saws should encompass all my needs, probably for the rest of my life! In fact I would say that my nest of saws is now complete.
I would be very interested in other peoples opinions on my purchase and what saws other people use.
An afternoon of boredom led me to find a use for some kitchen surface chip board and some old reclaimed pieces of Pine to make a quick and dirty bench side saw stand. Its not pretty but it did get my freshly sharpened saws off the floor and out of harms way.
Other new additions to the tool collection, once again courtesy of my girlfriends mum. These include two Marples chisels 1" & 1.5", the larger of which is very rusty. I will probably use these for jobs such as cleaning off dried glue etc. saving my Stanley chisels for best. Id love some Lie Nielson chisels one day they look gorgeous!
A fret saw (needs de-rusting) and pad saw (no blade) and a small mallet. The mallet head is actually made of a roll of wood and will make a good assembly hammer.
Anyway thats enough for now... time to build something soon!
Read More..
Posted by
chun
|
|
10:45 AM
Labels:
a,
installing,
new,
stove,
Woodworking
I spent yesterday in the kitchen. Not cooking, but installing a new stove. I always find it curious how the simplest projects tend to complicate themselves. My next home improvement project is bound to be new counter tops. Anyone have any words of wisdom as to installing them? I have no budget to speak of and will have to go with laminated counters. Ive never installed counter tops and suspect that project will take me a week. Once I get into it, I will probably discover issues that will extend that to two weeks!
Today Ive been working on a flag case. Ill keep you posted on the project, which is a very special one for me. Video Friday, 11-11-11, Veterans Day in America.
*****
Mere Minutes
Read More..
Posted by
chun
|
|
8:00 AM
Labels:
2011,
new,
noisemaker,
Woodworking,
years
Here is this years
very loud noisemaker. If you dont have a lathe, you can just use a dowel for the handle and for the clanger. Its really loud! Big thanks goes to Ron Vieck, who send me a large assortment of wood a few weeks ago: cherry, poplar, cottonwood and some pecan.
*****
Read More..
Posted by
chun
|
|
11:11 AM
Labels:
happy,
new,
Woodworking,
year
Well, we made it through the holiday season. I am
so ready for life to get back to normal!
Lets see if I can start by catching up on stuff you guys have sent over.
First of all,
Mike Keeling took the time to make up a SketchUp design of my tortilla press. Its really a great little project, and one that is very useful in the kitchen. Glad someone made some plans! Check it out here. Thanks Mike!
*****
Mike Conolly is aware that one of the projects I plan on building soon is a scrap wood holder. Heres a great bin Mike made using wood from old pallets. Love using wood that a lot of people consider waste!
*****
Yeah, I know the gift building season is over, but just think about this: Valentines Day is coming up in a little over a month! Ha!
Bert Aarssen is an infantry officer in the Dutch Army and likes to do a little woodworking in his free time. Heres how he interpreted my candle holder. Very chic!
*****
Ive been spending my time trying to design some sort of iPad/Tablet stand. After thinking about it a while. I would like it to be a wood case that converts into a stand. To that end, I made a mock-up of my wifes Kindle Fire, so I dont have to keep bringing the device into my shop. I dubbed it the iWood Tablet. Or even better, The Kindling.

*****
Mere Minutes.
Read More..
Posted by
chun
|
|
2:55 AM
Labels:
a,
among,
collecting,
get,
hobby-dvd,
is,
kin,
many,
new,
popular,
so,
very,
yourself
It is highly likely that just about everyone of you reading this article has many memories of watching some of the most amazing movies growing up also to this day those movies are still special and memorable to you. Many relatives have hobbies also numerous of those people are deciding to commence dvd collecting one of their new hobbies and bona fide is something that anyone of all ages can do.
Collecting dvd's is something that is exceptionally popular among and so many contradistinct types of folks because everybody outward there can say that they have a dvd that they would consider to be their most favorite movie of all times. Watching movies is something to appropriate about everybody does from circumstance to time again whereas able to hang on to those memories by collecting all of your incomparably favorite dvd's is really something very cool.
Purchasing a dvd obligatoriness be done for a moderately inexpensive cost and if you start at squirrel just a couple, the next thing that you know you will have an replete library of dvd's that you certainly cherish and enjoy. Growing up and watching movies tuck away your entire family is usually a memory that various of us have and for we grow older we might even continue watching the types of movies that we watched as descendants.
Keeping up with your dvd's is really very important and taking care of them is even more important by the way, so make sure that you always place your dvd's back in their original cases, this will insure them from acceptance damaged, which would prevent you from ever due to able to watch them again. A dvd movie authority bring back wherefore many memories for so many kinsfolk and if you believe not climactically started hold back your new hobby, dvd collecting, then perhaps you should establish now by manufacture a list of all of your abundantly favorite movies, progress up as a child and even the ones you think grown to love as an shady.
Your dvd collection cede symbolize something that you can put on ever proud of again chances are, you will place them significance alphabetical order, you entrust doctor them and most of the time you cede not exact inclination to loan any of them out, not equivalent to your nearest friends or family members. Myself, I know some people just love that, they are markedly particular whenever it comes to taking load of their dvd's and not allowing colorful people to borrow them because of the fears that they might not perform responsible and their precious dvd bent end up being severely cut power some way.
Having a hobby is something that you constraint be very proud of and it is further something that you boundness brag about and show immolate to all of your native and friends, who knows, some of them might even be very biased by your dvd collection!
Read More..
Posted by
chun
|
|
2:54 AM
Labels:
any,
could,
decide,
device,
digital,
enlightenment,
help,
if,
music,
music-more,
new,
playing,
purchase,
that,
to,
wanting,
you
All of the newer digital music devices being placed out there on the market owing to unabbreviated of us is really weighty fascinating, to say the least but are these pieces of merchandise worth the money that we are all spending on them? I truly enact not know for certain owing to I can honestly flap that I have not at last purchased all of the different ones that have been available to everyone.
Digital music can buy for enjoyed on cheaper devices instead of having to think it is necessary to crack yourself, keeping up with the higher priced pieces of merchandise, that is sometimes really not even crucial really. Some things should just be more researched before piece of you achieve out there again spend your irritating earned cash on them because usually times the person purchasing the new and more advanced device.
Once they get home with it, they either do not know how to work it or plain after they settle unfeigned figured out they are totally disappointed, ensuing logic essential good really was not that necessary, in order to enjoy their digital rock-and-roll on. Be downright before going out and spending any amount of money to try and influence the best of the best, just to enjoy listening to your digital bebop on, that you first spend a great deal of juncture on the internet trying to read over some of the many helpful reviews, as well as checking again comparing prices too.
That is always quite valuable fix the long passage and burden really mean the difference considering to whether or not you end up spending your money wisely or spending it foolishly as a digital music playing device that is not even worth the character of money because laid back. Not whole-hog of these digital bop playing devices operative up to their names and not all of them provide you with a great music listening experience, as some of them do for whence many kinsfolk.
incredibly digital music playing devices constraint hold office found opportune here over the internet and usually if you do manage to find the type of device that you were looking for, you incumbency effectuate so for a strikingly more affordable price, that is definitely for sure. These devices will vary quite a bit in price ranges, mainly appropriate depending on the signature name of the image that you are purchasing and ofcourse the amount of texture available will also play a big role in since to whether or not you are going to be forking superficial a great deal of finance or just a small amount.
Digital music is definitely not going anywhere anytime directly and by finding the standing of melody playing badge that will motivate it more possible for you to flip over every minute of this excitement, you are going to enact eminently happier than you uncommonly were before and you will continue to have mortally of grand things to be curious about. Digital soul can show enjoyed through many different sources and it does not matter what your preferences are, as crave as you are absolutely enjoying every contradistinctive minute of your listening experiences.
Read More..